標準號：BS F 156-2006
中文標準名稱：耐流體的乙丙烯橡膠板、模塑和擠壓件性能.規范
英文標準名稱：Properties of fluid resistant ethylene–propylene rubber sheet, mouldings and extrusions – Specification
標準類型：V13
發布日期：2006/10/31 12:00:00
實施日期：2006/10/31 12:00:00
中國標準分類號：V13
國際標準分類號：49.025.40
引用標準：BS 903-A1;BS 903-A6;BS 903-A13;BS ISO 6505;BS 903-A1 (ISO 2781);BS 903-A6 (ISO 815);BS 903-A13 (ISO 1432);BS 903-A26 (ISO 48);BS 3734-1 (ISO 3302-1);BS EN 3207;BS F 68;BS F 69;BS ISO 37;BS ISO 188 (BS 903-A19);BS ISO 1817
適用范圍：This British Standard specifies requirements for fluid resistantethylene–propylene rubber material with excellent ozone resistanceproperties intended for the production of items such as sheet,mouldings and certain extrusions, for use in sealing operations wherelow compression set is of prime importance while in contact withphosphate ester hydraulic fluids over a temperature range of p60 °Cto 100 °C, or with silicone hydraulic fluids over a temperature rangeof p60 °C to 130 °C1).For applications in contact with air, the material may be suitable for useover a temperature range of p60 °C to 120 °C.NOTE 1 Material in contact with phosphate ester hydraulic fluids may beexposed to temperatures up to 130 °C for intermittent periods, andmaterial in contact with silicone hydraulic fluids exposed to temperaturesup to 160 °C for intermittent periods.NOTE 2 Materials and products manufactured from this material areunsuitable for use in contact with fuels, mineral oil based and di-ester oilsand silicate fluids or greases derived from them.NOTE 3 Further information on the suitability of fluid resistantethylene–propylene rubber for design applications can be found in SBACTechnical Specification No. 97 [1].NOTE 4 Marking BS F 156:2006 on or in relation to a product representsa manufacturer’s declaration of conformity, i.e. a claim by or on behalf ofthe manufacturer that the product meets the requirements of the standard.The accuracy of the claim is solely the claimant’s responsibility. Such adeclaration is not to be confused with third party certification ofconformity.