標準號：BS EN 61000-3-2-2006+A2-2009
中文標準名稱：電磁兼容性(EMC).限制.諧波電流的排放限值(設備輸入電流
英文標準名稱：Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current k 16 A per phase)
標準類型：L06
發布日期：2006/5/31 12:00:00
實施日期：2006/5/31 12:00:00
中國標準分類號：L06
國際標準分類號：33.100.10
引用標準：IEC 60050-131;IEC 60050-161;IEC 60107-1;IEC 60155;IEC 60268-1-1985;IEC 60268-3;IEC 60335-2-2;IEC 60335-2-14;IEC 60974-1;IEC 61000-2-2;IEC/TS 61000-3-4;IEC 61000-3-12;IEC 61000-4-7;ITU-R BT.471-1
適用范圍：This part of IEC 61000 deals with the limitation of harmonic currents injected into the publicsupply system.It specifies limits of harmonic components of the input current which may be produced byequipment tested under specified conditions.Harmonic components are measured according to Annexes A and B.This part of IEC 61000 is applicable to electrical and electronic equipment having an inputcurrent up to and including 16 A per phase, and intended to be connected to publiclow-voltage distribution systems.Arc welding equipment which is not professional equipment, with input current up to andincluding 16 A per phase, is included in this standard.Arc welding equipment intended for professional use, as specified in IEC 60974-1, isexcluded from this standard and may be subject to installation restrictions as indicated inIEC 61000-3-4 or IEC 61000-3-12.The tests according to this standard are type tests. Test conditions for particular equipmentare given in Annex C.For systems with nominal voltages less than 220 V (line-to-neutral), the limits have not yetbeen considered.NOTE The words apparatus, appliance, device and equipment are used throughout this standard. They have thesame meaning for the purpose of this standard.