標準號：IEC 60512-16-3-2008
中文標準名稱：電子設備用連接器.試驗和測量.第16-3部分:觸點和終端的機械試驗.試驗16c:觸點抗彎強度
英文標準名稱：Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
標準類型：L23
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：L23
國際標準分類號：31.220.10
引用標準：IEC 60512-1-1
適用范圍：This part of IEC 60512, when required by the detail specification, is used for testing electricalconnectors within the scope of technical committee 48. It may also be used for similar deviceswhen specified in a detail specification.The object of this part of IEC 60512 is to detail a standard test method to determine the abilityof a contact to withstand a specified bending moment or force. If so specified in the detailspecification, forces other than bending may be applied.Although this test is illustrated for the mating area of cylindrical contacts, and is particularlyapplicable to those with a mating diameter of 1,2 mm or less, its use for contacts with othergeometries is not excluded. In which case, the detail specification shall contain sufficientdetail, given under Clause 6, i), j) and k), to enable the test to be done. Furthermore, it maybe used for any part of a connector (such as a keying or polarizing device; cable support orcontact latching feature) provided that sufficient detail is given in the detail specification.NOTE In some cases, IEC 60068-2-21 may be cited in the detail specification.