標準號：BS EN 15036-2-2006
中文標準名稱：加熱鍋爐.熱產生器空氣噪聲發射的試驗規則.熱產生器出口發出的燃氣噪聲
英文標準名稱：Heating boilers. Test regulations for airborne noise emissions from heat generators. Flue gas noise emissions at the outlet of the heat generator
標準類型：J98
發布日期：2006/10/31 12:00:00
實施日期：2006/10/31 12:00:00
中國標準分類號：J98
國際標準分類號：17.140.20;91.140.10
引用標準：EN 15036-1;EN 437;CEN/TR 1749;EN 60942;EN 61260
適用范圍：This European Standard applies to heat generators according to EN 15036-1, which are connected tochimneys/ducts which discharge combustion products via a duct into open air.The data measured according to this European Standard will probably be different from the noise radiatedfrom the end of the chimney.Readings from forced-draught burners complying with EN 267 or EN 676 are only applicable in practice if theyhave been taken in conjunction with a boiler. Noise emitted into chimneys/ducts by heat generators operatingindependently of indoor air can also be measured in accordance with this European Standard.Boilers supplied with combined air inlet and exhaust terminal configuration where ducts are within an externalwall can be measured according to one of the test methods detailed in EN 15036-1.This European Standard describes the objective procedure for determining sound power levels LW, at theoutlet of a heat generator that is emitting broad-band, narrow-band, or tonal continuous sound.This European Standard is applicable to boilers designed to be connected to a chimney or flue duct with aduct size greater than or equal to 0,06 m and whose mean flue gas flow at the microphone head is less than5 m/s.This European Standard only applies for test purposes under laboratory conditions.