標準號：BS EN 61076-3-101-1997
中文標準名稱：直流低頻模擬及高速數字?jǐn)?shù)據系統用已經過質量評定的連接器.矩形連接器.帶梯形殼的屏蔽連接器的有效范圍和在1.27x1.54mm中心線的非移動矩形接觸詳細規范
英文標準名稱：Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Rectangular connectors - Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable recta
標準類型：L23
發布日期：1998/1/15 12:00:00
實施日期：1998/1/15 12:00:00
中國標準分類號：L23
國際標準分類號：31.220.10
適用范圍：Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications Part 3. Rectangular connectors Section 101. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 × 2,54 mm centre-line 1 General data 1.1 Recommended method of mounting 1.2 Ratings and characteristics 1.3 Reference documents 1.4 Marking 1.4.1 On the connector 1.4.2 On the package 1.5 IEC type designation 1.6 Ordering information 2 Technical data 2.1 Definitions 2.2 Survey of styles and variants 2.3 Information on application 3 Dimensional information 3.1 General 3.2 Isometric view and common features 3.2.1 Common features 3.3 Mating information 3.3.1 Contact arrangement for fixed and free connectors 3.4 Fixed connectors 3.4.1 Dimensions 3.4.2 Contact arrangement 3.4.3 Termination 3.5 Free connectors 3.5.1 Dimensions 3.5.2 Contact arrangement 3.5.3 Termination 3.6 Accessories 3.7 Mounting information for fixed connectors with male or female contacts 3.7.1 Printed boards 3.7.2 Mounting on panel 3.8 Mounting information for free connectors 3.9 Gauges 3.9.1 Sizing and retention force gauges 3.9.2 Endurance, engaging/separating, insertion/withdrawal force gauges 3.9.3 Probes 3.9.4 Test panel (for voltage proof test) 4 Characteristics 4.1 Climatic category 4.2 Electrical 4.2.1 Creepage and clearance distances 4.2.2 Voltage proof 4.2.3 Current-carrying capacity 4.2.4 Initial contact resistance 4.2.5 Initial insulation resistance 4.3 Mechanical 4.3.1 Mechanical operation 4.3.2 Insertion and withdrawal forces 4.3.3 Contact retention in insert 4.3.4 Static load, axial 5 Test schedule 5.1 General 5.1.1 Arrangement for contact resistance measurement 5.1.2 Arrangement for dynamic stress tests 5.1.3 Arrangement for testing static load, axial 5.1.4 Wiring of specimens 5.2 Test schedule tables 5.2.1 Basic test schedule 5.2.2 Preliminary group P 5.2.3 Group AP 5.2.4 Group BP 5.2.5 Group CP 5.2.6 Group DP 5.2.7 Group EP 5.2.8 Group FP 5.2.9 Group GP 5.2.10 Group HP 5.2.11 Group JP 5.2.12 Group KP 6 Quality assessment procedures 6.1 Qualification approval testing 6.1.1 Method 1 6.1.2 Method 2 6.2 Quality conformance inspection 6.2.1 Lot-by-lot tests 6.2.2 Periodic tests 6.3 Delayed delivery, re-inspection Annexes A Mixed industrial gas test procedure B Mechanical tests C Microsection ZA (normative) Normative references to international publications with their corresponding European publications