標準號：BS EN 1032-2003+A1-2008
中文標準名稱：機械振動.振動輻射值測定用移動機械試驗
英文標準名稱：Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
標準類型：Z32
發布日期：2003/5/28 12:00:00
實施日期：2003/5/28 12:00:00
中國標準分類號：Z32
國際標準分類號：13.160
引用標準：EN 12096;EN 30326-1;ISO 2041-1990;ISO 5347;ISO 5348;ISO 5805-1997;ISO 16063
適用范圍：This European Standard specifies the determination of whole-body and hand-arm vibration emissions at operatorposition(s) during testing of mobile machinery. The purpose of this European Standard is to assist technicalstandardization committees responsible for specific types of machinery in preparing vibration test codes to ensurethat such vibration test codes?-are as homogeneous as possible with each individual test code having the same basic structure;?-are in full accordance with basic standards on measurement of vibration emission;?-reflect the latest technical knowledge of methods of determining the vibration emission from the specific familyof machinery under consideration;?-provide manufacturers with a standardized method for the determination and declaration of the vibrationemission value(s) of their machinery;?-enable the user of the machinery or the member of an inspection body to compare the vibration emissionvalues of different machinery and to verify the vibration emission values provided by the manufacturer.This European Standard provides requirements for the preparation of vibration test codes, including guidelines forthe conditions under which the measurements shall be made (e.g. operating conditions). Information to be includedin a typical vibration test code is summarized in Annex A.Vibration test codes based on this European Standard should define measuring procedures which provide accurateand reproducible results which are as far as possible in agreement with values measured under real workingconditions. For determination of the magnitude of the vibration to be noted in the instruction handbook, thisEuropean Standard requires operating conditions enabling the determination of the 75-percentile of the vibrationexperienced at the operator's position during the mode of operation causing the highest vibration.This European Standard applies to sitting and standing positions. It is applicable to all mobile machinery producingperiodic or random vibration with or without transients. Rotational vibration is not dealt with in this EuropeanStandard.This European Standard contains sufficient guidance for designing an appropriate test for machinery for which novibration test codes exist. It can also be used for the determination of vibration emission values of individualmachines.This European Standard does not present limits or recommended vibration values.In general, the emission values should not be used for assessment of the health risk. This European Standarddoes not give any guidance or recommendations for determination of human exposure to vibration and shock.NOTE For such information, reference is made to ISO 2631-1 and EN ISO 5349-1.