標準號：BS EN 1777-2010
中文標準名稱：消防和救援設備用液壓平臺(HPs).安全性要求和測試
英文標準名稱：Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
標準類型：C85
發布日期：2010/8/31 12:00:00
實施日期：2010/8/31 12:00:00
中國標準分類號：C85
國際標準分類號：13.220.10
引用標準：EN 349;EN 842;EN 894-1;EN 894-2;EN 894-3;prEN 894-4;EN 981;EN 982;EN 983;EN 1846-1-1998;EN 1846-2-2009;EN 1846-3;EN 60204-1-2006;EN 60529;EN 60947-5-1;CEN/TS 15989;EN ISO 12100-1-2003;EN ISO 12100-2-2003;EN ISO 13732-1;EN ISO 13849-1-2008;EN ISO 13849-2;E
適用范圍：This European Standard applies to vehicle mounted Hydraulic Platforms (HP's) as defined in 3.1, intended foruse by fire and rescue services. HP's may participate in fire fighting, rescue or protection of persons,protection of the environment and in a variety of other technical operations.This document identifies the significant hazards (see Clause 4) for all sizes of HP's used by fire and rescueservices, on the basis that they are supplied in a complete form, tested and ready for use. It also givesmethods for the elimination or reduction of these hazards. This document applies only to HP's classified ingroup B ? type 1 according to EN 280:2001, 1.4.NOTE 1 HPs of group B ? type 1 are those where the vertical projection of the centre of gravity of the load may beoutside the tipping lines and for which travelling is only allowed with the HP in its travel condition.Consequently this document does not apply to HP's with the following classification according toEN 280-2001, 1.4:? group A ? type 1;? group A ? type 2;? group A ? type 3;? group B ? type 2;? group B ? type 3.This document is intended to be used in conjunction with EN 1846-2 and EN 1846-3.This document deals with the technical safety requirements to minimise the hazards listed in Clause 4 whichcan arise during the commissioning, the operational use, the routine checking and maintenance of hydraulicplatforms when carried out in accordance with the specifications given by the manufacturer or his authorisedrepresentative.This document deals with all significant hazards, hazardous situations and events relevant to HP's, when theyare used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturerand taking account of their whole lifecycle (see Clause 4).NOTE 2 The lifecycle includes construction, transport, assembly and installation, commissioning, use (including setting,teaching/programming or process changeover), operation, cleaning, fault finding, maintenance, decommissioning,dismantling and, as far as safety is concerned, disposal.This document does not deal with the additional hazards for:? use in underground work (mines);? use in potentially explosive atmospheres;? flat belts for extending structure drive systems.This document is not applicable to HP's which were manufactured before the date of publication of thisdocument by CEN.