標準號:BS EN 10152-2009
中文標準名稱:電鍍鋅冷軋鋼板產品的交貨技術條件
英文標準名稱:Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
標準類型:H46
發布日期:2009/3/31 12:00:00
實施日期:2009/3/31 12:00:00
中國標準分類號:H46
國際標準分類號:77.140.50
引用標準:EN 10002-1-2001;EN 10020-2000;EN 10021-2006;EN 10027-1;EN 10027-2;EN 10051;EN 10079-2007;EN 10131;EN 10204-2004;EN ISO 7438;ISO 10113;ISO 10275
適用范圍:This European Standard specifies requirements for continuously electrolytic zinc coated cold rolled flatproducts of low carbon steels suitable for cold forming according to Table 1 in rolled widths ≥ 600 mm andthicknesses from 0,35 mm up to and including 3 mm, delivered as strip (in coil form), sheet, slit strip or cutlengths obtained from slit strip or sheet.NOTE 1 This European Standard can also be applied to continuously electrolytic zinc coated flat products of:a) steels according to EN 10139 (cold rolled strip in rolled widths < 600 mm),b) steels normally characterized by minimum yield strength or minimum tensile strength values in addition to formabilityparameters, e. g.1) steels with high yield strength and improved formability according to EN 10268 (cold rolled flat products),2) multiphase steels (cold rolled or hot rolled) according to prEN 10338,3) steels for construction according to national or regional standards (see e. g. DIN 1623).NOTE 2 By agreement at the time of enquiry and order this European Standard can be applied to continuouslyelectrolytic zinc coated hot-rolled steel flat products (e.g. according to EN 10025-1 and -2, EN 10111, EN 10149-1 to EN10149-3, etc.).NOTE 3 As the mass of the zinc coating applied is relatively small, the material is not intended to withstand outsideexposure without further chemical treatment and painting.
相關標準
《GB/T 5169.11-2017》電工電子產品著火危險試驗 第11部分:灼熱絲/熱絲基本試驗方法成品的灼熱絲可燃性試驗方法(GWEPT) GB/T 5169.11-2017 6.4
《GB/T 18487.3-2001》電動車輛傳導充電系統電動車輛交流/直流充電機(站) GB/T 18487.3-2001
《GB/T 18487.3-2001》電動車輛傳導充電系統電動車輛交流/直流充電機(站) GB/T 18487.3-2001
《GB/T 18487.3-2001》電動車輛傳導充電系統電動車輛交流/直流充電機(站) GB/T 18487.3-2001
《GB/T 26125-2011》電子電氣產品 六種限用物質(鉛、汞、鎘、六價鉻、多溴聯苯和多溴二苯醚)的測定 GB/T 26125-2011
《GB/T 26125-2011》電子電氣產品 六種限用物質(鉛、汞、鎘、六價鉻、多溴聯苯和多溴二苯醚)的測定 GB/T 26125-2011
《GB/T 26125-2011》電子電氣產品 六種限用物質(鉛、汞、鎘、六價鉻、多溴聯苯和多溴二苯醚)的測定 GB/T 26125-2011
《GB/T 26125-2011》電子電氣產品 六種限用物質(鉛、汞、鎘、六價鉻、多溴聯苯和多溴二苯醚)的測定 GB/T 26125-2011
《GB/T 5095.6-1997》電子設備用機電元件 基本試驗規程及測量方法 第6部分:氣候試驗和錫焊試驗 GB/T 5095.6-1997 10
《GB/T 5095.4-1997》電子設備用機電元件 基本試驗規程及測量方法 第4部分:動態應力試驗 GB/T 5095.4-1997 3
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;