標準號：DIN ISO 8132-2008
中文標準名稱：液壓傳動.16MPa(160bar)中型和25MPa(250bar)系列單桿汽缸.附件的安裝尺寸
英文標準名稱：Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories (ISO 8132:2006);English version of DIN ISO 8132:2008-06
標準類型：J20
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J20
國際標準分類號：23.100.20
引用標準：ISO 286-2;ISO 3320;ISO 3322;ISO 5598;ISO 6020-1;ISO 6022;ISO 6099
適用范圍：This International Standard lays down the mounting dimensions required for the interchangeability ofaccessories for the 16 MPa [160 bar1)] medium series cylinders in accordance with ISO 6020-1 and for the25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designedspecifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this doesnot limit their application.This International Standard covers the following accessories, identified in accordance with ISO 6099:-- AP2 -- rod clevis, female thread (see Figure 1 and Table 1);-- AF3 -- rod flange, circular (see Figure 2 and Table 2);-- AB4 -- clevis bracket, straight (see Figure 3 and Table 3);-- AB3 -- clevis bracket, in angle (see Figure 4 and Table 4);-- AT4 -- trunnion bracket (see Figure 5 and Table 5);-- AA8 -- pivot pin, plain or spherical bearing (cotter pin or snap ring type) (see Figure 6 and Table 6);-- AP6 -- rod eye spherical, female thread (see Figure 7 and Table 7);-- AP4 -- rod eye plain, female thread (see Figure 8 and Table 8).These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The designof these accessories is based on the maximum forces resulting from the specified internal diameters of thecylinders and pressures according to ISO 3320 and ISO 3322.This International Standard applies only to the dimensional criteria of products manufactured in conformitywith this International Standard; it does not apply to their functional characteristics.