標準號：BS EN 50377-5-1-2003
中文標準名稱：光纖通信系統中使用的連接器組和互連元件.產品規范.端接在IEC 60793-2類B.1.1單模纖維上的EC型連接器組和互連元件
英文標準名稱：Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type EC terminated
標準類型：M33
發布日期：2003/4/3 12:00:00
實施日期：2003/4/3 12:00:00
中國標準分類號：M33
國際標準分類號：33.180.20
適用范圍：1 Product definition This standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled singlemode EC connector set (plug adapter plug) must meet in order for it to be categorised as an EN product specification. Since different variants and grades of performance are permitted, product marking details are given in 3.5. 2 Intermateability All products conforming to the requirements of this standard will intermate, the resulting level of random attenuation performance will only be ensured in accordance with Table 1. The intention is that this will be true irrespective of the manufacturing source(s) of the product. In all cases, the intermating of plug variants having different attenuation grades will result in an uncertain level of random attenuation performance. Similarly, the intermating of plug variants with suffix A, with plug variants with suffix C, will result in an uncertain level of random attenuation performance. 3 Operating environment The tests selected combined with the severities and durations are representative of an external weather protected environment defined by -ES 200 671: external weather protected environment defined by ETS 300 019- f-3 classes 3.3; 3.4 and 3.5 -EN 61753-2-1 category U: uncontrolled environment. 4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 5 Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme.