標準號:DIN EN 13706-3-2003
中文標準名稱:增強塑料復合材料.擠拉制型材規范.第3部分:特殊要求
英文標準名稱:Reinforced plastic composites - Specifications for pultruded profiles - Part 3: Specific requirements; German version EN 13706-3:2002
標準類型:G31
發布日期:1999/12/31 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:G31
國際標準分類號:83.120
適用范圍:The document defines the specification of pultruded profiles. The specification defines those properties which shall be specified and the level to be obtained for each grade of profile. The specification defines grades where the short-form code, Exx, is related to the Young's modulus of the material measured by testing a length of the full section profile. Two grades; E23 and E17 are defined. Note: Other grades may be introduced at future revisions of the standard. The properties which shall be achieved for each class of profile are given in Table 1. Other properties that may be reported are listed in Table 2.
相關標準
《GB/T11363-200811,12.1》釬焊接頭強度試驗方法 GB/T 11363-2008 11,12.1
《GB/T11363-200811,12.2》釬焊接頭強度試驗方法 GB/T 11363-2008 11,12.2
《AWSD1/D1M-2015》鋼結構焊接規范
《GB/T2653-20086,7》焊接接頭 彎曲試驗方法 GB/T 2653-2008 6,7
《BSEN288Part-3:1992/A:1997》金屬材料焊接工藝評定 第三部分
《AWSD1.6/1.6M:2017》不銹鋼焊接規范
《BSEN288Part-1:1992/A:1997》金屬材料焊接工藝評定 第一部分 焊接操作規范
《ISO9606-1:2012》焊工考試 第1部分:鋼
《BSEN288Part-2:1992/A:1997》金屬材料焊接工藝評定 第二部分 電弧焊焊接工藝
《ISO15614-1:2012》金屬材料焊接工藝規程和評定-焊接工藝試驗 第1部分:鋼的電弧焊和氣焊與鎳及鎳合金的電弧焊
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;