標準號：UL 2080-2000
中文標準名稱：易燃和可燃液體儲罐
英文標準名稱：UL Standard for Safety Fire Resistant Tanks for Flammable and Combustible Liquids First Edition
標準類型：E98
發布日期：2000/3/14 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：E98
國際標準分類號：23.020.10
適用范圍：1.1 These requirements cover shop fabricated, aboveground atmospheric Fire Resistant Tanks intended for storage of stable flammable or combustible liquids that have a specific gravity not greater than 1.0 and that are compatible with the material and construction of the tank. 1.2 These tank constructions are intended to limit the heat transferred to the primary tank when the construction is exposed to a 2-hour hydrocarbon pool fire. Tanks appropriately identified by product markings provide protection for the primary tank against projectile impact and vehicle impact. 1.3 Fire Resistant Tanks are intended for stationary installation and use in accordance with the Flammable and Combustible Liquids Code, NFPA 30, and the Automotive and Marine Service Station Code, NFPA 30A. 1.4 Tanks covered by these requirements are fabricated, inspected, and tested for leakage before shipment from the factory as completely assembled units. 1.5 These requirements and tests are not intended to determine a tank's acceptability for use after fire exposure, vehicle impact, or projectile impact. 1.6 These requirements do not address methods of anchoring which may be required to prevent uplift from flooding or movement due to wind or seismic forces. 1.7 These requirements do not address either the construction, or attachment means of ladders, stairs, runways, guardrails, platforms, or equipment supports. 1.8 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.