標準號：ISO 10724-1-1998
中文標準名稱：塑料 熱固性粉末模塑復合物試樣的注射模塑成型 第1部分:一般原則和多用途試樣的模塑成型
英文標準名稱：Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens
標準類型：G31
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G31
國際標準分類號：83.080.10
適用范圍：This part of ISO 10724 specifies the general principles to be followed when injection moulding test specimens of thermosetting powder moulding compounds (PMCs) and gives details of mould designs for preparing one type of specimen for use in establishing reproducible moulding conditions. Its purpose is to promote uniformity in describing the main parameters of the moulding process and also to establish uniform practice in reporting moulding conditions. The particular conditions required for the reproducible preparation of test specimens which will give comparable results will vary for each material used. These conditions are given in the International Standard for the relevant material or are to be agreed upon between interested parties. NOTE ISO round-robin tests with phenolic (PF), urea-formaldehyde (UF), melamine (MF), melamine phenolic (MP) and unsaturated-polyester (UP) injection-moulding materials have shown that mould design is an important factor in the reproducible preparation of test specimens.