標準號：BS ISO 11907-3-1998
中文標準名稱：塑料制品.煙霧生成.滅火廢液腐蝕性的測定.第3部分:采用移動式熔爐的動態分解法
英文標準名稱：Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Dynamic decomposition method using a travelling furnace
標準類型：G31
發布日期：1998/6/15 12:00:00
實施日期：1998/6/15 12:00:00
中國標準分類號：G31
國際標準分類號：13.220.40;83.080.01
適用范圍：1 This part of ISO 11907 specifies a test method for generating thermal decomposition products from plastic materials or products in an air stream and assessing the corrosive effects of these fire effluents on targets. It is not intended that the results be used to assess the corrosivity hazard of fire atmospheres. 2 It describes a dynamic decomposition test method for the assessment of the corrosion damage of a standardized target by the change in its electrical resistance. 3 The decomposition model is suitable for simulating the main fire scenarios, such as a smouldering fire, a developing fire with flame formation, and a fully developed fire. The decomposition model enables a constant flow of smoke to be maintained throughout the exposure time. The decomposition model and exposure model enable the potential for a contribution to corrosivity to be estimated.