標準號：BS EN 61803-1999+A1-2010
中文標準名稱：帶有電網換流轉換器的高壓直流(HVDC)變流站功率損失的測定
英文標準名稱：Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
標準類型：F21
發布日期：1999/6/15 12:00:00
實施日期：1999/6/15 12:00:00
中國標準分類號：F21
國際標準分類號：29.200
適用范圍：This International Standard applies to all line-commutated high-voltage direct current (HVDC) converterstations used for power exchange in utility systems. This standard presumes the use of 12-pulse thyristorconverters but can, with due care, also be used for 6-pulse thyristor converters.In some applications, synchronous compensators or static var compensators (SVC) may be connected to thea.c. bus of the HVDC converter station. The loss determination procedures for such equipment are notincluded in this standard.This standard presents a set of standard procedures for determining the total losses of an HVDC converterstation. Typical HVDC equipment is shown in Figure 1. The procedures cover all parts, except as notedabove, and address no-load operation and operating losses together with their methods of calculation whichuse, wherever possible, measured parameters.Converter station designs employing novel components or circuit configurations compared to the typicaldesign assumed in this standard, or designs equipped with unusual auxiliary circuits that could affect thelosses, shall be assessed on their own merits.