標準號：BS EN ISO 308-1998
中文標準名稱：塑料.酚制模材料.丙酮可溶性物質測定(非制模狀態下透明樹脂含量)
英文標準名稱：Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
標準類型：G31
發布日期：1998/1/15 12:00:00
實施日期：1998/1/15 12:00:00
中國標準分類號：G31
國際標準分類號：83.080.10
適用范圍：This International Standard specifies a gravimetric method for the determination of the amount of matter that can be extracted by acetone, at a temperature near its boiling point, from a sample of finely divided phenolic moulding material. The method applies only to moulding materials based upon novolak resins and not to those based upon resols, as the latter type of resin may not be completely soluble in acetone. In this International Standard, the amount of acetone-soluble matter is reported as the apparent resin con-tent because, although the extract consists mainly of phenolic resin and hexamine, other acetone-soluble components such as lubricants and colorants or na-tural resins from the filler are normally also present and will therefore be reported as resin.