標準號：BS EN 60603-10-1998
中文標準名稱：印制電路板用頻率低于3 MHz的連接器.倒置型2.54 mm(0.1 in)基本網格印制電路板用二部式連接器
英文標準名稱：Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards for basic grid of 2, 54 mm (0,1 in), inverted type
標準類型：L30
發布日期：1998/5/15 12:00:00
實施日期：1998/5/15 12:00:00
中國標準分類號：L30
國際標準分類號：31.220.10
適用范圍：This specification covers a group of related two-part connectors for printed boards. It describes connectors with 32, 48, 64 and 96 contacts for low-voltage applications. The board-mounted connectors with female contacts are provided with terminations suitable for printed boards in accordance with IEC 326 and using a grid of 2,54 mm (0,1 in) as laid down in IEC 97. The fixed connectors with male contacts are provided either with solder contacts or with wrap contacts. The terminations of the fixed connectors are located in such a way as to be suitable for use with mother boards using a grid of 2,54 mm (0,1 in) as laid down in IEC 97 as well as for automatic wiring techniques. This standard shall be used in conjunction with the following IEC publications: Publications Nos. 50(581) (1978): International Electrotechnical Vocabulary (IEV) - Chapter 581: Electromechanical components for electronic equipment. 97 (1970): Grid system for printed circuits. 194 (1988): Terms and definitions for printed circuits. 326: Printed boards. 512: Electromechanical components for electronic equipment; Basic testing procedures and measur-ing methods. 603-1 (1991): Connectors for frequencies below 3 MHz for use with printed boards, Part 1: Generic specification -General requirements and guide for the pre-paration of detail specifications, with assessed quality.