作者:蠟筆小董 時間:2023-01-03 來源:互聯網
ISO 813 硫化或熱塑性橡膠 與剛性粘合強度的測定 90度剝離法—標準名稱
ISO 813 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90° peel method
ISO 813 硫化或熱塑性橡膠 與剛性粘合強度的測定 90度剝離法
ISO 813 硫化或熱塑性橡膠 與剛性粘合強度的測定 90度剝離法—適用范圍
Scope:
This document specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90
ISO 813 硫化或熱塑性橡膠 與剛性粘合強度的測定 90度剝離法—引用文件
ISO 5893 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
ISO 18899 Rubber — Guide to the calibration of test equipment
ISO 23529 Rubber — General procedures for preparing and conditioning test pieces for physical test methods
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;
①本網注名來源于“互聯網”的所有作品,版權歸原作者或者來源機構所有,如果有涉及作品內容、版權等問題,請在作品發表之日起一個月內與本網聯系,聯系郵箱service@baijiantest.com,否則視為默認百檢網有權進行轉載。
②本網注名來源于“百檢網”的所有作品,版權歸百檢網所有,未經本網授權不得轉載、摘編或利用其它方式使用。想要轉載本網作品,請聯系:service@baijiantest.com。已獲本網授權的作品,應在授權范圍內使用,并注明"來源:百檢網"。違者本網將追究相關法律責任。
③本網所載作品僅代表作者獨立觀點,不代表百檢立場,用戶需作出獨立判斷,如有異議或投訴,請聯系service@baijiantest.com