標準號：DIN EN 12717-2009
中文標準名稱：機械工具的安全.條播機(含修改件A1:2009),英文版本DIN EN 12717:2009-07
英文標準名稱：Safety of machine tools - Drilling machines (includes Amendment A1:2009); English version of DIN EN 12717:2009-07
標準類型：B91
發布日期：1999/12/31 12:00:00
實施日期：2009/7/1 12:00:00
中國標準分類號：B91
國際標準分類號：25.080.40
引用標準：EN 292-1-1991;EN 292-2-1991;EN 294-1992;EN 349;EN 457;EN 574;EN 614;EN 626;EN 894-1997;EN 894-3-2000;EN 953-1997;EN 954-1;EN 982-1996;EN 983-1996;EN 999;prEN 1005-1998;EN 1037-1995;EN 1050-1996;EN 1088-1995;EN 1127-1-1997;EN 1760-1-1997;EN 1837;EN ISO 374
適用范圍：1.1 This standard specifies the technical safety requirements and measures to be adopted by personsundertaking the design, construction and supply (including installation and dismantling, with arrangements fortransport and maintenance) of stationary drilling machines (see 3.1).This standard covers both manual and automatic drilling machines. These include but are not limited to:-- pedestal drilling machines (see figure A.1);-- radial arm drilling machines (see figure A.2);-- coordinate table drilling machines (see figure A.3);-- horizontal spindle drilling machines (see figure A.4);-- multi-spindle drilling machines (see figure A.5)-- turret type drilling machines with manual control of turret index.1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance,cleaning, and setting operations. It presumes access to the machine from all directions. It describes meansto reduce risks to operators and other exposed persons.1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine.1.4 This standard deals with significant hazards relevant to drilling machines when they are used as intendedand under the conditions foreseen by the manufacturer (see clause 4).1.5 Hazards arising from other metal working processes (e.g. milling, grinding, turning, forming, EDM, laserprocessing) are covered by other standards (see Bibliography).1.6 Automatic drilling machines with automatic tool changing capabilities are not covered by this standard(see prEN 12417:1996).1.7 This standard is not applicable to drilling machines, which were manufactured before the date ofpublication by CEN of this standard.