標準號：ISO 16276-1-2007
中文標準名稱：防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂應力)的評定和驗收標準.第1部分:脫落測試
英文標準名稱：Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing
標準類型：A29
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：A29
國際標準分類號：87.020;87.040;91.080.10
適用范圍：This part of ISO 16276 specifies procedures for assessing the fracture strength of a protective paint coating ofany thickness on a steel substrate of thickness not less than 10 mm. The procedures given in this part ofISO 16276 are based on methods used with different types of pull-off test equipment. The results obtainedusing such different types of equipment are not comparable.This part of ISO 16276 is only applicable if a fracture strength value is specified, together with the type of testequipment and the manufacturer of the equipment. Usually, this information is included in contractdocumentation.This part of ISO 16276 also specifies suitable equipment and defines inspection areas, sampling plans andacceptance/rejection criteria.It does not give any values of the fracture strength of different protective paint coatings.