標準號：ISO 10321-2008
中文標準名稱：土工織物.用寬條法對接頭/接縫處的拉伸試驗
英文標準名稱：Geosynthetics - Tensile test for joints/seams by wide-width strip method
標準類型：W59
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：W59
國際標準分類號：59.080.70
引用標準：ISO 554;ISO 3696;ISO 7500-1;ISO 9862;ISO 10318-2005;ISO 10319
適用范圍：This International Standard specifies an index test method for determination of the tensile properties of jointsand seams in geosynthetics, using a wide-width strip. The method is applicable to most geosynthetics. It isalso applicable to geogrids, but the specimen dimensions may need to be altered. This test is not applicable topolymeric or bituminous geosynthetic barriers.This method quantifies the tensile strength of a joint or seam between geosynthetics. It can provide data toindicate the joint or seam tensile strength which can be achieved.A joint or seam efficiency can be calculated by comparison of the joint/seam tensile strength with the tensilestrength of the unjointed material, as determined by ISO 10319.Procedures for measuring the tensile properties of both conditioned and wet specimens are included.Some modification of techniques may be necessary for particular geosynthetics, e.g. strong geosynthetics,meshes or geosynthetics made from glass fibre, to prevent them from slipping in the jaws or being damagedas a result of being gripped in the jaws.The basic test for joints or seams in all kinds of geosynthetics uses test specimens of 200 mm width, with theprovision for the seam or joint to extend for 25 mm on each side, in order to provide joint or seam stabilityduring the test