標準號：ISO/TS 11155-1-2001
中文標準名稱：道路車輛 乘員艙內空氣濾清器 第1部分:顆粒過濾試驗
英文標準名稱：Road vehicles - Air filters for passenger compartments - Part 1: Test for particle filtration
標準類型：T30
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T30
國際標準分類號：43.040.20
適用范圍：This part of ISO/TS 11155 specifies a particulate filtration test, including the critical characteristics of equipment, test procedure and report format, for the consistent assessment of filter elements in a laboratory test rig with particle sizes larger than 0,3 μm. It is applicable to filters for removing particulate matter from external or recirculated air used for ventilating motor vehicle passenger compartments or cabins. The test specified in this part of ISO/TS 11155 enables an assessment of filter elements for pressure loss, fractional filtration efficiency and accelerated particulate holding capability against standardized laboratory particulate challenges. Because the test methods exclude the full range of possible particulate challenges and environmental effects, the relative ranking of filters may change in service. NOTE 1 Absolute comparability is only possible with filter elements of the same shape and size as well as the same position in the test duct. NOTE 2 Subject to agreement between supplier and the customer, the test procedure allows for the calculation of gravimetric efficiency as a single parameter for quality control purposes. For gravimetric efficiency tests refer to ISO 5011.